Heyan took part in ALLPACK Indonesia 2026 at the Jakarta International Expo (JIExpo) in Jakarta, Indonesia, from October 20 to 23. Over the four days of the show we met packaging producers, beverage brands and mold buyers from across Southeast Asia at our booth, C3T320.
About ALLPACK Indonesia 2026
ALLPACK Indonesia is a long-running packaging and processing exhibition for the Indonesian market. The 2026 edition was the 25th, held together with AllProcess, IPEX, AllPlas and AllBeverage Indonesia, all organized by Krista Exhibitions. The organizer reported an exhibition area of around 80,000 square meters, with more than 1,500 exhibitors from over 50 countries. For mold suppliers, the show is a practical place to meet the converters and brand owners who are planning PET bottle and packaging projects for the coming year.
Where to Find Heyan — Booth C3T320
Our booth was in hall C, stand C3T320. Visitors could see sample PET preform molds, blow molds, cap molds and handle molds, along with the mold components we use in production. Most conversations started with a specific bottle project and the question of which mold type and cavitation would fit it.
What We Brought to the Show
Heyan produces molds for the PET bottle supply chain. At ALLPACK Indonesia 2026 we focused on four product lines:
- PET preform molds — for the injection stage of bottle production
- Blow molds — for shaping the finished bottle
- Cap molds — for closures and screw caps
- Handle molds and ring molds — for handled bottles and carriers
Because these parts have to work together on the same production line, we often discuss the full set rather than a single mold.
Technical Capabilities Discussed with Visitors
The specifications most visitors asked about were:
- Cavitation: 1 to 96 cavities
- Neck finish: 18 mm to 30+ mm
- Part weight: 8 g to 80 g
- Mold steel: 4Cr13 and FS136
- Mold base: 4613H
- Tolerance: down to 0.01 mm on precision features
On lead time, preform molds typically run 45 to 75 days, and blow molds 30 to 55 days, depending on mold complexity and cavitation. Our standard terms are 30% deposit with the balance before shipment, and we confirmed these figures with the buyers we met at the booth.
Conversations on the Floor
Requests at the show followed a pattern. Beverage producers were comparing cavitation counts for new water and CSD lines. Several visitors came with existing molds that underperformed and wanted to review the steel, cooling layout and hot runner setup. Others were planning lids and handles for bottles already in production and needed tooling that matched their current preform.
We worked through these cases at the booth, and where a project needed more detail we scheduled follow-up discussions after the show.
Frequently Asked Questions
Where was Heyan’s booth at ALLPACK Indonesia 2026?
Heyan exhibited at booth C3T320 in hall C at the Jakarta International Expo (JIExpo) in Jakarta, Indonesia, from October 20 to 23, 2026.
What molds did Heyan show at ALLPACK Indonesia 2026?
We presented PET preform molds, blow molds, cap molds, and handle and ring molds for the PET bottle supply chain.
What specifications can Heyan molds cover?
Cavitation from 1 to 96 cavities, neck finishes from 18 mm to 30+ mm, part weights from 8 g to 80 g, mold steel in 4Cr13 and FS136, and tolerances down to 0.01 mm on precision features.
What is the typical lead time for Heyan molds?
Preform molds typically take 45 to 75 days and blow molds 30 to 55 days, depending on mold complexity and cavitation.
How can I contact Heyan after the show?
You can reach us by phone or WhatsApp at +86-13824903611, by email at [email protected], or through the contact page at heyanmold.com/contact-us/.
Talk to Heyan
If you visited us at ALLPACK Indonesia 2026 and would like a quotation, a mold drawing review or help matching a mold to your bottle project, you can reach us directly. You are also welcome to send your bottle drawing and target output, and we will come back with a mold proposal.
Foshan Heyan Precision Mold Technology Co., Ltd.
Tel / WhatsApp: +86-13824903611
Email: [email protected]
Web: heyanmold.com
