Check shot weight, tie-bar spacing, platen size, ejector stroke and nozzle height to confirm a preform mold fits your injection molding machine.
Check shot weight, tie-bar spacing, platen size, ejector stroke and nozzle height to confirm a preform mold fits your injection molding machine.
Choose a PET preform mold for high-speed lines: cavity count, cooling, hot runner and machine match for stable cycles above 1,000 bottles per hour.
A seven-step check of PET neck finish before ordering a preform mold: thread, tamper evidence, capper fit and dimensional tolerances.
Match a PET blow mold to your blowing machine on clamp force, pitch, cavity layout and heating, before you place the order.
Calculate PET preform mold cavity count from annual output, cycle time and machine uptime, with worked examples and a usable formula.
How cooling channel layout, flow and baffle design change PET preform mold cycle time, and how to quantify the gain before you rebuild a mold.
What dimensional accuracy a PET bottle cap mold can hold, which features drive tolerance, and how to verify it before the mold leaves the shop.
Compare compression and injection molding for bottle caps on cycle time, tooling cost, tolerances and changeover, and see which fits your output.
Fix short shots, flash, ovality and gate marks in injection-molded PET caps. Track each defect back to mold, process or material causes.
Build a bottle cap mold spare parts list before downtime. Ejector pins, sleeves, inserts and hot-runner tips, with replacement intervals and stock levels.
WhatsApp us