Why parting lines show on PET bottles, how mold parting surface, clamp force and blow ratio affect them, and what can realistically be reduced.
Why parting lines show on PET bottles, how mold parting surface, clamp force and blow ratio affect them, and what can realistically be reduced.
What to send in a PET preform mold RFQ: bottle drawing, preform spec, resin, machine data and output target, so quotes are comparable.
How a PET preform mold is built and how it works: cavity and core, hot runner, cooling, ejection, and the manufacturing sequence.
Design a PET hot-fill bottle mold: neck crystallinity, base vacuum absorption, panel flex and shrinkage allowance for filling above 85C.
PET bottle manufacturing step by step: resin drying, preform injection, reheating, blow molding and inspection, with what each step controls.
Nominal, brimful and headspace capacity explained for PET bottles, with how each is measured and why fill volume disputes start here.
Diagnose PET bottle base deformation by separating mold causes from process and post-ejection causes, with a practical troubleshooting order.
Convert an existing bottle to a SIDEL blowing machine: the machine, pitch, clamp and heating data your mold supplier needs before quoting.
Why outer cavities in a multi-cavity cap mold run different dimensions, and how to zone, measure and correct cavity-to-cavity temperature.
Reduce PET preform cycle time through cooling, hot runner balance, process settings and cavity count, with the sequence that avoids scrap.
WhatsApp us